PEEL AWAY® MARINE SAFETY STRIP was the #1 rated marine paint remover by PRACTICAL SAILOR and POWERBOAT REPORTS. PEEL AWAY® MARINE SAFETY STRIP is a safe remover that can penetrate multiple coats of bottom paint in ONE application without hurting the gel coat. It will work on all type of marine coatings including Micron CSC, VC 17, Bottomkote and others. This product is also exceptional for removing varnishes and polyurethane from fine wood surfaces.

Dumond's RECYCLEAN pressure wash/vac unit is recommended for Boat Yards that work on boats near the water and need to keep the rinse water contained. See photo below.
THREE FEATURES FOR USING PEEL AWAY® MARINE SAFETY STRIP ARE:
1. Much less labor intensive than hand sanding of abrasive blasting.
2. NO toxic paint dust is created so this product can be used at a boatyard without disturbing your surroundings
3. It will not penetrate the gel coat, so no extra work is needed to repair damage done by blasting.

NOTE: If you have an epoxy barrier coating underneath bottom paint, and you do not want to remove it, use PEEL AWAY® MARINE STRIP II. This product will remove the bottom paint and stop at the epoxy barrier coat.